|
 |
15” full color Liquid Crystal Display (LCD) active matrix with 800x600 pixel resolution with touch screen. |
|
Speed, pressure and linear position control of clamp and injection. |
|
Speed and pressure control of both core and eject. Linear position control of eject. |
|
Closed-Loop injection process control with 1.0 msec update capability, including: 10-step injection velocity PID control of pack and hold pressure, back pressure control, screw speed and automatic cushion control. |
|
PID barrel and nozzle temperature control. Alarms include high/low limits and deviation, heater burnout, thermocouple break, and cold screw start protection. |
|
Selectable transfer by time, position, hydraulic pressure or (optional) cavity pressure. |
|
Graphic displays of up to 4 process parameters at one time. Actual performance may be displayed against programmed injection velocity and pressure profiles. Profiles can be time or position-based and documented via the printer port. |
|
On-board machine and system diagnostics, with I/O status screens. |
|
Internal storage on hard drive for mold set-ups. |
|
SPC calculations with high-resolution X-bar, R-charts, and histograms of current data. |
|
Cpk process capability index with USL and LSL alarms for all 8 SPC parameters. |
|
Printer capability for print outs of SPC charts, line graphs, and operator screens. |
|
Ethernet or 3-1/2” floppy disk drive for storage of mold set-ups and programs. |
|
Machine Alarm Logging and Setpoint Change Logging. |
|
Up to 16 Levels of Security Access with Local Security Access Code Management. |
|
Distributed I/O for reduced machine wiring. |
|
Clamp
Services
